Skip to main content

When speed to power matters, stack it.

Pre-built SCR for 5 to 60 MW gas turbines. Installed in weeks, permit-ready, and it moves with your fleet when the grid arrives.

95%+

NOX reduction

Up to 40,000*

hours between catalyst replacements

<5%

RMS deviation in NH3:NOX

Discover StackCR

Performance

TECS never settles for good enough and you shouldn't either. The performance of our StackCR systems exceeds industry standards. Don't settle, stack!

Modularity

Pre-piped, pre-wired, pre-tested modules deploy faster than anything else in the industry. Need to move your turbine? It's never been easier with StackCR. A field-erected SCR gets cut up for scrap.

Standardization

Our standard reactor modules couple to any turbine between 5 and 60 MW. Looking to standardize your fleet? StackCR is the answer.

Rapid mechanical completion

While you were waiting for a crane to set your next duct section... you could have stacked it and been generating power.

Others: 10 weeks

Others

TECS: 2 weeks**

TECS
Isometric model of a complete SCR system: an exhaust stack with access platform, three reactor modules, a plenum module and an ammonia vaporization skid.
Dispersion module
Customizable stack heights to check the box on your air permit. Silencers and CEMS equipment available on request.
Standardized reactor modules
Our standardized reactor modules (3 shown) are road transportable.
Ammonia Injection Grid
Multi-zone grid tuned for uniform distribution, <5% RMS deviation in NH3:NOX ratio by design, with minimal ammonia slip.
Plenum module
Minimizes backpressure to protect turbine output.
Collection module
Includes expansion joints that ensure structural integrity during operation and shutdown.
Catalyst Access Ports
Railed side-entry catalyst ports allow a single catalyst module to be removed and replaced.
Ammonia Flow Control Unit
2 × 100% with auto-failover, so a blower fault never takes the turbine down. Keeps you in compliance through a blower fault. Ammonia tanks and forwarding pumps included on request.
Side view of a single SCR reactor module, with untreated exhaust entering on the left and treated exhaust leaving on the right.
Untreated
exhaust
Treated
exhaust
Inlet flow control
Inlet flow control devices ensure uniform flow across the catalyst beds.
Oxidation catalyst
Oxidizes CO and VOCs, 90%+ CO reduction.
Ammonia Injection Grid
Multi-zone grid tuned for uniform distribution, <5% RMS deviation in NH3:NOx ratio by design, with minimal ammonia slip.
SCR catalyst
Reduces NOx emissions by 95%+.

Compatible turbines

Every StackCR reactor module is the same module, sized for any simple-cycle gas turbine from 5 to 60 MW. More capacity? Stack it. One module across the fleet means one set of spares, one catalyst, one training program. And because the modules road-ship without disassembly, they hold their value when the turbine moves.

Solar 2 x SMT60 2 x 5.7MW

Siemens SGT 300 9MW

Dynamis DT17 7.5MW

Siemens SGT 400 15MW

Solar SMT130 16MW

Baker Hughes NovaLT16 17.5MW

GE LM2500XPRESS 34MW

Solar Titan 350 37MW

GE LM6000VELOX 57MW

Talk to an engineer

Get in touch if you have any questions about our products or services, or if you would like to discuss a potential project.